Setting up a breadboard for 5 volts (Link)
Soldering a power adapter (Link)
Soldering a switch (Link)
LEDs in Series (Link)
LEDs in Parallel (Link)
Solder a potentiometer (LINK)
Set up the board (LINK)
First Arduino program. Blink an LED(S) (LINK)
Connect a switch (LINK)
Digital in and out (example)
Connect a potentiometer (LINK)
Analog input ADC (ADC example)
Connect a relay (LINK)
Connect a transistor (LINK)
Control a Motor (LINK)
Etch a Circuit Board(LINK)

This is where you will find the labs.